SNC Techs provides PEEK Tubes Pipes for a wide range of dimensions

You are here: Home » PEEK tube pipe

PEEK Tube Pipe

PEEK tube pipe offers excellent chemical, high temperature and creep resistance. It is very dimensionally stable and has a high mechanical bearing strength. PEEK tubes pipes are used for many different industries, especially in the oil and gas industry.
SNC Techs can provide PEEK tubes pipes for a wide range of dimensions through various processing methods to help customers reduce material waste. In addition, by adding fillers to the raw material to enhance the performance of the PEEK tubes pipes to meet the application requirements of different scenarios.

SNC Techs is available in numerous modifications to meet your requirements. They include:

PEEK-N

Natural (Unfilled) PEEK

High thermal resistance and thermal stability
Good mechanical properties at elevated temperatures
Good chemical resistance
High purity and low outgassing
Good biocompatibility
Excellent dimensional stability
Good electrical insulation

PEEK-CF30

30% carbon filled PEEK

Increased strength, stiffness, and stability
Creep resistance
Conductive

PEEK-GF30

30% glass filled PEEK

Increased compression strength and stiffness
Creep resistance
Reduced expansion rates
No conductive

PEEK-HPV

10% carbon + 10% graphite + 10% PTFE filled PEEK

Excellent sliding friction properties
Good wear resistance
Good chemical resistance

PEEK TUBE PIPE SIZES

PEEK DATA SHEET

Production methods of PEEK Tube Pipe

Extruded PEEK Tube Pipe

Extrusion is a method that uses screw rotation and pressure to continuously extrude thermoplastic polymer into a mold, and when it passes through a certain shape of a die, a plastic profile that is compatible with the shape of the die is obtained.

The length of the continuously extruded PEEK TUBE is unlimited, and its physical properties are comparable to those of injection molding. For large-volume orders, extrusion is very cost-effective. SNC Techs can provide a complete range of PEEK TUBE molds and stock products
Compression molded PEEK Tube Pipe

The compression molded method is to put the preheated polymer into the mold, by applying heat and pressure to make it shape.

The compression molded PEEK TUBE has low internal stress, stable mechanical and physical properties, and almost no material waste and MOQ. SNC Techs can provide a wide range of compression molds, especially for large diameter PEEK TUBE (greater than 1000mm)
Injection molded PEEK Tube Pipe

Injection molded is a method to use an injection molded machine to quickly inject molten polymer into a mold cavity and solidify to obtain various plastic products.

Because of the fast production speed and short delivery time, injection molding is suitable for small finished products and medium and large batch orders.